Polymer For Hyrdo-Seeding & Hydro Mulching

Hydro-Seeding

Hydro-Seeding is an advanced method of quickly applying water, seed & fertiliser to a large area. It is especially useful in uneven & difficult to access areas. Adding a tackifier during application dramatically increases the strike rate by holding the seeds in place during the germination phase of growth.  

Water$ave Hydro-Tac is a stand-alone tackifier that does not require the use of mulch during application. Hydro-Tac improves your strike rate while reducing seed loss due to wind & rain. By using Hydro-Tac you can also reduce your watering frequency while improving the water filtration & the physical properties of soils.

 

Hyrdo-Mulching

Hydro-Mulching is a method of quickly applying water, seed & fertiliser in combination with a growth medium eg mulch. It is common to introduce a binding agent into the slurry before application to help stabilise the mulch & retain moisture. The addition of a linear polymer to the blend can act as a binder that will help the mulch bind together & stay in place while the seeds germinate.

Water$ave Hydro is a blend of superabsorbent & linear polymers designed specifically for Hydro-mulching. Hyrdo absorbs both water & fertiliser then releases them over time. This leads to an increased strike rates & fewer dry or bare spots. Hydro can also limit leaching while improving the physical properties of compacted soil.

 

Water$ave Hydro & Water$ave Hydro-Tac are both available in 15kg pails. They are non-toxic & biodegrades over time.

 

Learn more or purchase Water$ave Hydro & Water$ave Hydro-Tac.